Garmin MapSource Podręcznik Użytkownika Pobierz pdf (Strona 18)

14 MapSource User’s Manual

usIng Mapsource > transferrIng Mapsource data

Sending Data to Your GPS Unit

If your GPS unit has a storage card, verify that the card

is inserted correctly into the unit. Also, connect your

GPS unit to your computer and set your unit’s Data

Transfer mode to Garmin, if applicable (see your unit

owner’s manual for instructions).

You can send maps, waypoints, routes, or tracks to

your GPS unit.

NOTE: MapSource transfers all of the data listed

in a data tab to your GPS unit each time you

transfer data.

To send data to a GPS unit or card reader:

1. Verify that the data you want to send appears in

the corresponding data tabs on the left side of

the MapSource window.

2. Click

Send To Device or click Transfer >

Send To Device.... The name of your GPS unit

or card reader should appear automatically in

the Device menu. If not, click Find Device.

• If you are using a USB card programmer,

“USB Data Card Programmer” appears in

the

Device eld.

• If you are using a CF or SD card reader,

select the correct drive letter from

the Device eld. For example, select

“Removable Disk (E:).”

• If you are sending data to an iQue or cf

Que, select where you want to save data

under Map Storage Location. If necessary,

select the correct user name from the

Device elds.

3. Under What to Send, check the boxes next to

each type of data you want to send.

4. Click Send. MapSource begins sending data to

your GPS unit or card reader. After you begin

transferring data, you can check the box next to

Turn Off GPS After Transfer, if available.

5. If you are using an iQue or cf Que, synchronize

with your personal computer, if necessary, so

that your unit receives the data.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

Komentarze do niniejszej Instrukcji

Brak uwag

Garmin MapSource Podręcznik Użytkownika Strona 18

Komentarze do niniejszej Instrukcji