Garmin Software Version 0321.23 Podręcznik Użytkownika Strona 69

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 152
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 68
Garmin G1000 Cockpit Reference Guide for the DA40/40F
190-00324-11 Rev. C 53
Hazard Avoidance
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
GFDS Weather Data Requests
The GFDS Data Request window provides the flight crew with the options to define
the requested weather coverage area(s), choose automatic weather update intervals (if
desired), and the ability to send or cancel weather data requests. The window also
displays the status of the GFDS data request process.
Requesting GFDS Weather Data Manually
1)
Select the GFDS Weather Data Link Page.
2)
Press the MENU Key.
3)
With ‘GFDS Weather Request’ highlighted, press the
ENT
Key.
4)
Turn the large FMS Knob to highlight the desired coverage option(s)
and press the
ENT
Key to check or uncheck one of more of the following
coverage selections:
•
PRESENT POSITION – Requests data based on current location.
•
DESTINATION – Requests data based on active flight plan
destination (if the flight plan contains no destination, dashes ‘------” are
displayed.)
•
FPL – Requests data based on active flight plan. Turn the small
FMS Knob to select the desired flight plan look-ahead distance
option (or choose ‘REMAINING FPL’ to request the remainder of the
flight plan).
•
WAYPOINT – Requests data based on any valid waypoint.
5)
Turn the large FMS Knob highlight to the ‘DIAMETER / RTE WIDTH’
distance field and turn the small FMS Knob to select the desired diameter
and route width of the request, then press the
ENT
Key.
6)
Turn the large FMS Knob until the ‘SEND REQ’ button is highlighted. Press
the
ENT
Key to initiate the request immediately or press the FMS Knob to
return to the GFDS Data Link Page without requesting data.
During a GFDS Data Request, the Request Status box initially displays “Contacting
GFDS...”. Once a connection is established, the Request Status Box displays “Receiv-
ing Wx Data... Time Remaining:” with an estimated data transfer time (either minutes
or seconds). If desired, the GFDS Data Request window may be closed while the data
request is processing by pressing the FMS Knob; the data request will continue to
process in the background. GFDS Data Requests typically take between 1 to 4 minutes
to complete depending on the size of the selected weather coverage area and Iridium
signal strength.
Przeglądanie stron 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 151 152

Komentarze do niniejszej Instrukcji

Brak uwag