Garmin Software Version 0458.01 Podręcznik Użytkownika Strona 34

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 116
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 33
Garmin G1000 Cockpit Reference Guide for the Beechcraft A36/G36
4-4
SECTION 4 – NAV/COM &
TRANSPONDER
4.6 FREQUENCY AUTO-TUNING
Auto-tuning on the PFD
Figure 4-9 Nearest Airports Window (PFD)
1. Press the
NRST
softkey to display the Nearest
Airports Window.
2. Turn either
FMS
knob to highlight the desired
frequency.
3. Press the
ENT
key to place the frequency in the
standby field of the active COM.
4. Press the
Frequency Toggle
key to place the
frequency in the active field.
NAV frequencies are entered automatically in the NAV
window upon approach loading or approach activation.
Auto-tuning on the MFD
Auto-tuning on the MFD is done in much the same
way as on the PFD. Use the FMS knobs to select the de-
sired frequency on any of the information pages. Pressing
the ENT key then loads the selected frequency into the
standby frequency window of the appropriate radio.
4.7 TRANSPONDER
Mode Selection
The STBY, ON and ALT softkeys can be accessed by
pressing the
XPDR softkey.
Ground Mode (Automatic)
GND is displayed when the aircraft is on the ground.
Figure 4-10 Ground Mode
Reply Status
When the transponder sends replies to interrogations,
an “R” indication appears momentarily in the reply status
field.
Figure 4-11 Reply Indication
Code Selection
1. Press the
XPDR
softkey to display the transpon-
der Mode Selection softkeys.
2. Press the
CODE
softkey to display the transpon-
der Code Selection softkeys, which includes the
digit softkeys.
3. Press the appropriate digit softkeys to enter
the code in the four-digit code eld of the
Transponder Status bar. Five seconds after the
fourth digit has been entered, the transponder
code becomes activated.
When entering a code, press the
BKSP
soft-
key as needed to back up and change code
digits.
Przeglądanie stron 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 115 116

Komentarze do niniejszej Instrukcji

Brak uwag