Garmin GPSMAP 296 Instrukcja Użytkownika Strona 127

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 168
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 126
Advanced NMEA Output Setup
If you are going to interface the GPSMAP 296 with another piece
of equipment, the unit needs to be set to output NMEA data. The
NMEA data transmission can be customized to keep the output rate
at two seconds. If too many NMEA sentences are selected the unit
can take longer than two seconds to update. You can also set the
rate to Fast to output a minimum number of NMEA sentences at
1-sceond intervals.
To access the Advanced NMEA Output Setup:
1. Press MENU twice to open the Main Menu.
2. Use the ROCKER to select Setup from the vertical tab list.
3. Select Com 1 or Com 2 from the row of tabs along the top.
4. Highlight the field below Serial Data Format. Press ENTER.
5. Select NMEA In/NMEA Out. Press ENTER.
6. Press MENU to open the options menu. Select Advanced
NMEA Setup, and press ENTER.
Advanced NMEA Output Setup
The Advanced NMEA Output Setup Page allows you to set the
output rate, change the precision of the Lat/Lon minutes, set
Waypoint IDs to names or numbers, as well as turn on and off the
GPS status, the GARMIN Proprietary sentences, and Waypoint/
Route (WPL, RTE).
GPSMAP 296 NMEA Sentence Output (NMEA version 3.01
compliant):
Always transmitted: GPRMC, GPGGA, GPGLL, GPBWC,
GPVTG, GPXTE, GPRMB
Switchable sentences: GPGSA, GPGSV, GPWPL, GPRTE
GARMIN proprietary: PGRME, PGRMZ, PGRMM
GPSMAP 296 Pilot’s Guide 119
MAIN MENU > SETUP TAB
Przeglądanie stron 126
1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 167 168

Komentarze do niniejszej Instrukcji

Brak uwag