Garmin 100 Instrukcja Użytkownika Pobierz pdf (Strona 16)

Installation

Installing the Display

Display Installation (Flush Mount)

The Fishfinder 100 can be mounted flush against the dash or electron-

ics rack that is no more than 1/4” thick.

Flush Mounting the Display:

1. Remove the Surface Mount Bracket and Knobs.

2 Cut a 4.3”W x 4.35”H relief hole where the unit will be mounted.

3. Place the display in the relief hole and tape in place.

4. Reinstall the knobs in the unit. Install the surface mount with the cam

lobes pointed toward the unit.

5. Rotate the surface mounting bracket forcing the cam lobes to pull the

unit tight against the surface. Tighten the knobs.

Pull bracket down until cam lobe contacts surface

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 48 49

Brak uwag

Garmin 100 Instrukcja Użytkownika Strona 16