Garmin Software Version 0764.20 Podręcznik Użytkownika Strona 84

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 194
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 83
Cirrus Perspective
by Garmin – Cockpit Reference Guide for the SR20/SR22/SR22T
190-00821-10 Rev. A
68
Hazard Avoidance
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
press the ENT Key to select or deselect one of more of the following coverage
selections:
PRESENT POSITION – Requests data based on current location.
DESTINATION – Requests data based on the active flight plan
destination (Direct-To destinations excluded). See the Flight Management
section for more information about entering and activating flight plans.
FPL – Requests data along an active flight plan, if one exists. Turn the
small FMS Knob to select the desired flight plan look-ahead distance
option (or choose ‘REMAINING FPL’ to request the remainder of the
flight plan), then press the ENT Key.
WAYPOINT – Requests data based on a waypoint (which may be off-
route). Turn the large and small FMS Knobs to enter a waypoint, then
press the ENT Key.
5)
Turn the large FMS Knob highlight to the ‘DIAMETER / RTE WIDTH’
(diameter/route width) distance field and turn the small FMS Knob to select
the desired diameter and route width of the request, then press the ENT Key.
6)
Turn the large FMS Knob until the ‘SEND REQ’ button is highlighted. Press
the ENT Key to initiate the request immediately or press the FMS Knob to
return to the Weather Data Link (CNXT) Page without requesting weather
data.
During a Connext Data Request, the Request Status box initially displays
“Contacting Connext...”. Once a connection is established, the Request Status Box
displays “Receiving Wx Data... Time Remaining:” with an estimated data transfer time
(either minutes or seconds). If desired, the Connext Data Request window may be
closed while the data request is processing by pressing the FMS Knob; the data request
will continue to process in the background. Connext Data Requests typically take
between 1 to 4 minutes to complete depending on the size of the selected weather
coverage area and Iridium signal strength.
The system retrieves all available Connext Weather products within the selected
coverage area during an initial Connext Data Request, regardless of which products (if
any) are currently enabled for display. On subsequent requests, previously retrieved
textual data (such as METARs and TAFs) is retained if it has not expired, while new
textual weather data matching the current coverage area and all graphical weather data
is downloaded during every data request.
If the system cannot complete a Connext weather data request, one or more mes-
sages will appear in the request status window as shown in the following table.
Przeglądanie stron 83
1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 193 194

Komentarze do niniejszej Instrukcji

Brak uwag