
Garmin G1000 Cockpit Reference Guide for the Socata TBM 850
190-00708-00 Rev. A
8-11
SECTION 8 – FLIGHT PLANNING
For flight plan leg planning, select the
FPL
Softkey
(at the bottom of the display) and turn the small
FMS
Knob to select the desired flight plan (already
stored in memory), by number. Turn the large
FMS
Knob to highlight the ‘LEG’ field and turn the
small
FMS
Knob to select the desired leg of the
flight plan, or select ‘CUM’ to apply trip planning
calculations to the entire flight plan. Selecting
‘FPL 00’ displays the active flight plan. If an active
flight plan is selected, ‘REM’ is an available option
to display planning data for the remainder of the
flight plan.
NOTE: The Page Mode must be set to MANUAL
to perform the following steps.
5)
Turn the large
FMS
Knob to highlight the departure
time (DEP TIME) field.
NOTE: The departure time on the Trip Planning
Page is used for preflight planning. Refer to the
Utility Page for the actual flight departure time.
6)
Turn the
FMS
Knobs to enter the departure time.
Press the
ENT
Key when finished. (Departure time
may be entered in local or UTC time, depending
upon system settings).
7)
Turn the
FMS
Knobs to enter the fuel flow. Press
the
ENT
Key when finished. Note that in automatic
page mode, fuel flow is provided by the system.
8)
The flashing cursor moves to the fuel on board field.
Turn the
FMS
Knobs to modify the fuel on board.
Press the
ENT
Key when finished.
9)
The flashing cursor moves to the calibrated airspeed
field. Turn the
FMS
Knobs to enter a calibrated
airspeed. Press the
ENT
Key when finished.
Komentarze do niniejszej Instrukcji