Garmin Software Version 0719.00 Podręcznik Użytkownika Pobierz pdf (Strona 176)

Garmin G1000 Cockpit Reference Guide for the Socata TBM 850

190-00708-00 Rev. A

10-24

SECTION 10 – HAZARD

AVOIDANCE

Vertically Scanning a Storm Cell

NOTE: Vertical scanning of a storm cell should

be done with the aircraft wings level to avoid

constant adjustment of the Bearing Line.

While in the Horizontal Scan view, select the BRG

Softkey. This places the cursor in the BEARING ﬁeld

and displays the Bearing Line (Figure 10-37).

the Bearing Line is not displayed, press the MENU

Key and turn the large

FMS Knob to select ‘Show

Bearing Line’. Press the ENT Key.

Turn the small

FMS Knob to place the Bearing

Line on the desired storm cell or other area to be

vertically scanned.

Figure 10-37 Bearing Line on Horizontal Scan

Bearing Line

Scan Line

Select the

VERTICAL Softkey. A vertical “slice”

of the selected area is now displayed (Figure 10-

38).

The small

FMS Knob may be used to move the

scanned “slice” a few degrees right or left.

Turn the Joystick to adjust the range.

Press the FMS Knob to remove the cursor.

To select a new area to be vertically scanned, select

the HORIZON Softkey to return to the Horizontal

Scan view and repeat the previous steps.

The Joystick can also be used to adjust bearing from

left to right.

Figure 10-38 Vertical Scan Display

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 227 228

Brak uwag

Garmin Software Version 0719.00 Podręcznik Użytkownika Strona 176