Garmin Software Version 0424.01 Podręcznik Użytkownika Strona 41

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 130
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 40
Garmin G1000 Cockpit Reference Guide for Mooney M20M & M20R
27
SECTION 2 – PFD
Navigation Source
The HSI can display two sources of navigation, GPS
or NAV (VOR, localizer, and glideslope). In GPS mode
the flight plan legs are sequenced automatically. Enabling
OBS mode suspends auto sequencing of waypoints, but
retains the current “active to” waypoint as your navigation
reference even after passing the waypoint. When OBS is
disabled the GPS returns to normal operation, with auto
-
matic sequencing of waypoints. OBS mode also allows
the pilot to set the desired course TO/FROM a waypoint.
Color indicates the current navigation source, magenta
(for GPS ) or green (for NAV). As the user crosses the
MAP, “SUSP” appears on the HSI in place of OBS and the
OBS softkey now reads “SUSP”, indicating that automatic
sequencing of approach waypoints is suspended at the
MAP. A yellow ‘INTEG’ and ‘WARN’ may appear on the
HSI when the following occurs:
INTEG – RAIM is not available
WARN – GPS detects a position error
To change between navigation sources:
1. Press the
CDI softkey to change from GPS to
NAV1. This will place the cyan tuning box over
the NAV1 standby frequency in the upper left
corner of the PFD.
2. Press the
CDI softkey again to change from
NAV1 to NAV2. This will place the cyan tuning
box over the NAV2 standby frequency.
3. Press the
CDI
softkey a third time to return to
GPS.
To enable/disable OBS mode while navigating
with GPS
:
1. Press the
OBS softkey to select OBS Mode.
2. Turn the small CRS knob to select the desired
course TO/FROM the waypoint.
3. Press the OBS softkey again to return to normal
operation.
Figure 2-25 GPS INTEG, GPS SUSP, NAV1 and NAV2
Przeglądanie stron 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 129 130

Komentarze do niniejszej Instrukcji

Brak uwag