Garmin Software Version 0424.01 Podręcznik Użytkownika Strona 44
- Strona / 130
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Garmin G1000 Cockpit Reference Guide for Mooney M20M & M20R
30
SECTION 2 – PFD
Transponder Status Bar
The Transponder Status Bar displays the transponder
code, reply symbol, and mode of operation. TIS (Traffic
Information System) surveillance data up-linked by Air
Traffic Control (ATC) radar through the GTX33 Mode S
Transponder appears on the Inset Map (PFD), Navigation
and Traffic Map Pages on the MFD (refer to the MFD Pilot’s
Guide). If the transponder is configured with
Automated
Airborne Determination, normal operation begins when
lift off is sensed. When the aircraft is on the ground, the
window automatically displays “GND”. The transponder
does not respond to ATCRBS interrogations when GND is
annunciated. If a delay time is set in Configuration Mode,
the transponder waits a specified length of time after land
-
ing before changing to
GND mode.
Transponder Operation
Pressing the
XPDR softkey displays the second-level
softkeys:
• STBY – Selects standby mode. When in standby
mode, the transponder does not reply to any
interrogations.
• ON – Selects Mode A. In this mode, the transpon-
der replies to interrogations, as indicated by the
Reply Symbol (R). Replies do not include altitude
information.
• ALT – Selects Mode C. In ALT mode, the tran-
sponder replies to identification and altitude
interrogations as indicated by the Reply Symbol
(R). Replies to altitude interrogations include the
standard pressure altitude received from an exter
-
nal altitude source, which is not adjusted for baro
-
metric pressure. The ALT mode may be selected
in aircraft not equipped with an optional altitude
encoder; however, the reply signal will only reply
to mode A interrogations. The transponder also
responds to interrogations from TCAS equipped
aircraft.
• VFR – Sets the transponder code to the pre-pro-
grammed VFR code selected in Configuration
Mode (this is set to 1200 at the factory).
• CODE – Displays the transponder code selection
softkeys, which includes the digits 0-7 and BKSP.
• IDENT – Pressing the IDENT softkey activates
the Special Position Identification (SPI) Pulse for
18 seconds, identifying the transponder return on
the ATC screen.
Transponder Code Selection
Transponder code selection is performed with eight
softkeys (0-7) providing 4,096 active identification codes.
Pushing one of those keys begins the code selection se
-
quence. The new code is activated five seconds after the
fourth digit is entered. Pressing the BKSP softkey removes
one digit at a time until the status bar is empty (refer to the
Mode S Transponder Pilot’s Guide).
Figure 2-30 Transponder Status Bar
2.5 ALERTS AND ANNUNCIATIONS
Alerts and Annunciations that appear on the PFD are
described in detail in Appendix A of this Cockpit Refer-
ence Guide.
- COPYRIGHT 3
- RECORD OF REVISIONS 4
- TABLE OF CONTENTS 6
- Appendix A 97 7
- Index 111 7
- LIST OF FIGURES 8
- LIST OF TABLES 10
- WARRANTY 11
- WARNINGS & CAUTIONS 12
- SECTION 1: INTRODUCTION 15
- 1.1 G1000 CONTROLS 16
- SECTION 1 – INTRODUCTION 17
- 1.2 SECURE DIGITAL CARDS 18
- 1.3 SYSTEM POWER-UP 18
- PFD Power Up 19
- MFD Power Up 19
- 1.4 INITIAL OPERATIONS 20
- 1.5 BACKLIGHTING 20
- 1.6 REVERSIONARY MODE 20
- SECTION 2: PRIMARY FLIGHT 23
- SECTION 2 – PFD 24
- 2.1 BACKLIGHTING 26
- 2.2 SOFTKEY FUNCTION 27
- Airspeed Indicator 31
- Attitude Indicator 32
- Altimeter 34
- Marker Beacon Annunciations 36
- Vertical Speed Indicator 37
- Navigation Frequency Window 42
- Navigation Status Bar 43
- Transponder Status Bar 44
- SECTION 3: AUDIO PANEL 45
- SECTION 3 – AUDIO PANEL 46
- Microphones 47
- Mono/Stereo Headsets 47
- Unmuted/Unswitched Inputs 47
- Power-up Settings 48
- Fail-safe Mode 48
- Selecting Keys 48
- Deselecting Keys 48
- Lighting 48
- Transceiver Keys 49
- Pressing a COM MIC Key 49
- Pressing a COM Key 49
- Keying a Microphone 49
- COM Swap 50
- Split COM 50
- PA Function 50
- Split COM and PA 51
- Speaker Output 51
- Description and Operation 52
- 3.4 RADIO INPUTS 54
- PILOT Mode 55
- COPILOT Mode 55
- CREW Mode 55
- ALL Mode 55
- 3.6 VOLUME/SQUELCH CONTROL 56
- Intercom VOL/SQ State 57
- 3.7 DISPLAY BACKUP MODE 58
- SECTION 4: MULTI FUNCTION 59
- DISPLAY 59
- Manifold Pressure Gauge 61
- Tachometer 61
- Fuel Qty Indicator 61
- 4.3 MFD PAGE GROUPS 64
- Working With Menus 65
- 4.4 NAVIGATION MAP PAGE 66
- MFD Navigation Status Window 73
- Navigation Map Page Menu 74
- 4.5 TRAFFIC MAP PAGE 75
- TIS Symbology 77
- Traffic Map Page Operations 77
- 4.6 WEATHER MAP PAGE 80
- Weather Map Page Operations 81
- 4.7 TERRAIN PROXIMITY PAGE 82
- Displaying Obstacle Data 83
- 4.8 DIRECT-TO NAVIGATION 84
- Active Flight Plan Page 89
- FLIGHT PLAN CATALOG PAGE 92
- Arrivals and Departures 96
- Approaches 97
- Selecting Approaches 98
- GPS Approach Examples 100
- SECTION 4 – MFD 101
- A.1 INTRODUCTION 111
- A.2 ALERT LEVELS 112
- Audio Alerts 113
- Voice Alerts 113
- APPENDIX A 114
- Database Message Advisories 118
- GMA 1347 Message Advisories 118
- GIA 63 Message Advisories 119
- GEA 71 Message Advisories 121
- GTX 33 Message Advisories 121
- GRS 77 Message Advisories 122
- GMU 44 Message Advisories 122
- GDC 74A Message Advisories 123
Powiązane produkty i podręczniki dla Nawigatory Garmin Software Version 0424.01
(6 strony)
Nawigatory Garmin SA01535Wi_D Instrukcja Obsługi
(314 strony)
(314 strony)
(6 strony)
Nawigatory Garmin SA01535Wi_D Instrukcja Obsługi
(308 strony)
(308 strony)
Nawigatory Garmin 20 Instrukcja Użytkownika
(20 strony)
(20 strony)
Nawigatory Garmin GPS 38 Instrukcja Użytkownika
(68 strony)
(68 strony)
© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.034 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji